Just as you’re going to watch your favorite television program…

Your television is broken.

However, additional examination…

You realize that the remote, not the LG television, is the source of the issue.

However, you’re fortunate.


Because LG remotes are simple to repair.

And I’ll help you do it.

Keep reading to discover:

  • The causes for LG remotes suddenly malfunctioning.
  • Seven easy fixes to get your LG TV remote working again
  • How to obtain a virtual LG remote replacement for your mobile device.
  • And much more…

Why doesn’t my LG TV remote work?

Your LG TV remote is inoperable due to loose or dead batteries. In rare instances, obstructions or dust particles prevent your television from detecting the remote control. Occasionally, it might also occur if your TV’s firmware is out of date.

LG TV remote not functioning: seven fixes

1: Reset your remote control

Typically, when LG TV remotes quit operating…

The issue is caused by trivial things, such as loose battery connections.

Therefore, before you decide to purchase a new remote or batteries…

Determine if a simple remote reset can resolve the issue.

This is a straightforward procedure that may be completed in a few minutes.

However, it has saved me a fortune on battery replacements.

To reset your LG remote:

  1. Turn it over.
  2. Remove the book’s back cover.
  3. Remove the battery from the device.
  4. Delay for ten seconds
  5. Replace the batteries in your remote control.
  6. Return the book’s cover.

If you’re having trouble removing the remote’s rear cover, you can view this video:

2: Replace the remote control’s batteries

If your LG television won’t turn on using the remote…

Then its batteries are likely already dead.

But fret not. Batteries for remotes are inexpensive and easy to buy.

Note: Both batteries must be replaced with new ones. Do not mix fresh and old batteries, as they may still transmit a faint signal if combined.

To replace the batteries, do the following:

  1. Remove the remote’s battery cover.
  2. Remove the batteries
  3. Insert the replacement batteries.
  4. Return the remote control’s back cover.

Note: Ensure that the + and – ends of your battery correspond to the labels within your remote.

Verify the remote’s functionality.

Ensure that the remote’s LED indicator illuminates whenever a button is pressed.

If it doesn’t…

The issue is caused by the remote itself. And you may need to purchase a replacement remote.

3: Remove obstructions between your television and remote

It is usual to set objects and displays in front of a television.

While this is a completely innocuous deed…

Placing an object in front of the IR sensor of your television will prevent it from receiving remote signals.

What is an infrared sensor?

An IR sensor is a device that detects infrared light emanating from its environment.

The remote emits this style of light whenever a button is pressed.

And your television receives the signal via its IR sensor. This is how your TV and remote communicate.

But in contrast to other wireless technologies such as Bluetooth and WiFi…

IR sensors require a clear line of sight to the IR signal.

That indicates…

You must point your remote directly towards the IR sensor of your television.

If they cannot line directly with one another…

Signals are unable to transmit properly or at all.

To ensure that your television can recognize your remote…

Here are the steps you should take:

Locate the IR sensor on your TV in the first step.

This is typically seen in the lower right corner of LG televisions.

Remove any obstructions in front of the sensor in Step 2.

Step 3: Obtain the remote.

Step four: aim the remote at the sensor.

Step five is to press any button.

If your television does not respond to the remote even though there is a clear line of sight…

4: Examine both devices’ IR sensors

Clearing any obstructions between the IR sensors of both devices will not solve the issue if…

One of the sensors has been obstructed by dust or dirt.

Although a dust particle will not directly affect the functionality of your remote…

Dust accumulation over time can result in a significant signal blockage.

Fortunately, this issue is straightforward to address.

Simply clean both the IR sensors on your television and your remote.

This can be accomplished with a clean towel or rag.

After thoroughly cleaning both sensors…

Check whether the TV now reacts to the remote’s signals by re-directing the remote to the TV.

5: Power cycle your TV

When your TV’s remote control stops responding…

It is easy to assume that the remote is causing the issue.

However, this is not always the case.

Like any other technology…

Your television is susceptible to minor faults and malfunctions due to its ongoing operation.

The good news is that it is simple to eliminate these minor issues.

Simply cycling the device’s power will resolve the issue.

However, what is power cycling exactly?

It is a fancy word with a straightforward meaning. In short, it means to turn off your television and then turn it back on.

The quickest way to accomplish this is to unplug and re-plug your television.

What occurs when I power cycle my television?

When you disconnect the TV from its power supply…

You permit it to terminate all of its active and background processes.

Believe it or not…

Some continue to operate even when your television is in standby mode.

And when these chores grow overwhelming…

Your television may be too overloaded to accept additional commands.

Including even the simplest ones generated by your remote control.

But when all of its power is depleted, even background processes must cease.

And if there are any errors or issues with these running applications…

They will also be eliminated.

Restarting your television after cycling the power enables a new start.

And I am aware that anything it does can be frightening…

However, the method is lot straightforward than you believe.

All that is required is:

  1. Turn off your television.
  2. Unplug the device from the outlet.
  3. Hold the TV’s power button for ten seconds.
  4. Wait for three minutes.
  5. Reconnect the cord to the socket.
  6. Activate your TV.

Check whether the TV now reacts to the remote.

6: Upgrade your TV’s firmware

When was the last time you upgraded your LG television?

If you don’t…

Then it is time to repeat the action.

Updates are essential to the smooth operation of your television system.

Because outdated firmware leaves a system susceptible to problems…

And may even render some of its capabilities inoperable.

Similar to what is occurring with your remote control.

The good news is that it is simple to upgrade LG televisions.

You need only access your remote…

Oh, wait, yours doesn’t work.

Fortunately, there is a simple solution to this problem.

Did you know that you can use a mobile app as the remote for your LG television?

If not…

Then today is your day of luck.

Here’s how to use your phone as a remote control for your LG television:

Install the LG Smart ThinQ app (iOS and Android) on your mobile device.

On Android devices:

  1. Launch the Play Store app on your mobile device.
  2. investigate LG ThinQ
  3. Tap Install.
  4. Wait till the installation is complete.

On Apple iOS:

  1. On your mobile device, launch the App Store.
  2. Touch the magnifying glass in the lower-right corner.
  3. Click the search bar located at the top of the screen.
  4. Select LG ThinQ
  5. Select the GET button.
  6. Await the completion of the installation process.

Step 2: Launch the LG ThinQ app and activate your television.

Step 3: Tap the Add button at the top of your app’s screen.

Step 4: Is to go to Home Appliances.

Step 5:  The model number of your LG television.

Step 6: Wait for a TV-displayed verification code.https://www.android.com/

Step 7: Enter the code into the application.

The app now functions as your virtual remote control.

Check to see if your television responds to your phone.

If so, you can opt to use this virtual remote instead of repairing your current one.

But well…

Isn’t it inconvenient for your phone to serve as your constant remote control?

While it can serve as a temporary replacement…

Still, it is preferable to get your old remote working.

So let’s get back on track and upgrade your TV using this virtual controller.

Because a simple update may quickly restore the functionality of the physical one.

To upgrade LG televisions using webOS:

  1. Using your virtual remote, press the Home/Smart button.
  2. Tap Settings in the upper-right corner of your screen.
  3. Choose All Settings
  4. Click General and then About this TV from the list of options.
  6. If an update is available, adhere to the on-screen instructions.

To upgrade LG televisions using Netcast:

  1. Tap Home/Start on your virtual remote control.
  2. Select Settings in the lower-left corner of the screen.
  3. Select the Other tab.
  4. Click Software update and enable the switch.
  5. Select Check Version for Updates.
  6. If there are available updates, follow the on-screen instructions.

The completion of the updating procedure may require some time. Do not power off your device during the update.

After upgrading your television, attempt to…

7: Re-register your remote control

Now that your television is operating on the most recent firmware version…

Time to retry registering your actual remote with the television.

Don’t fret. This is a quick procedure.

All that is required is:

  1. Turn on your television.
  2. Press the Home and Back buttons simultaneously on the remote.
  3. Wait for the red lights on your remote to flicker.
  4. Press the OK button on the remote control.

A confirmation message will appear to indicate that your remote has been registered.

At this time, it ought to be operational.

Therefore, if your remote is still unresponsive…

It is time to replace your remote control.

All technology elements decay with time.

The remote for your LG television is no exception.

Therefore, if you’re still having issues…

It is time to replace the current 1 with a new one.

Amazon makes it simple to purchase universal LG remote controls.

It won’t cost you anything, but it will greatly improve your streaming experience.

Write Your Comments

Your email address will not be published.


September 2022