Are trampolines that are buried safer than those that are above ground?

Above-ground trampolines are much riskier for people of all ages than ones that are on the ground. With an in-ground trampoline, the chances of falling from a height are incredibly low. As we all know what kids are like. They love to play outside, but their mothers worry about them all the time. So, putting an in-ground trampoline in your backyard can keep your kids from going outside and help them have more fun at home.

There are a few main reasons why in-ground trampolines are safe:

Most of the reasons why we can trust in-ground trampolines are:

Easy for kids to use

In-ground trampolines are easy for kids to get to. Kids make their moms worry about their safety. It’s clear that mothers can’t be with their kids all the time. She must have a lot of housework to do as well, which is why they start to do whatever they want. By putting an in-ground trampoline in your backyard, you can leave your kids there and let them have fun because it is easy for them to get to. It’s very low to the ground.

No Steps Required

Kids and old people can’t climb the stairs properly, so they are very likely to fall and hurt themselves.

As we all know, the best in-ground trampolines are just attached to the ground and don’t need stairs. It’s safe for kids and people of all ages. All they have to do is step on it. And they can enjoy their spare time.

How high to jump and how safe it is

If we talk about the above-ground trampoline, a person can easily jump up to 2 or 3 feet. If we add the height of the above-ground trampoline to the height of the jump, that is too much height. If a person falls from that height, he would be hurt so badly. So, an in-ground trampoline doesn’t have any height on its own. Second, you can put up safety nets to make your surroundings much safer.

Indoor Safety

As we all know, playgrounds are like heaven for kids. Different kinds of slides, swings, see-saws, mazes, etc., draw kids’ attention, and they think this is their whole world and they can enjoy and play as much as they want, but this is also not safe. We all know that kids are carefree. They can’t keep them safe during their fun time. So it’s important for parents to be with their kids at playgrounds to watch out for them and protect them from bad people. But none of the parents are able to do this.

IN-GROUND trampolines are easy to set up in your backyard at home. So, your kids will be safe, right in front of you, and they can have as much fun as they want. They can also get closer to their parents by spending more and more time with them.

More safety facts

American Academy of Orthopedic Surgeons says that in-ground trampolines are safer than above-ground trampolines because the jumping surface is very close to the ground.

Final Verdict

In ground trampolines are safer and more secure than trampolines that are above the ground. Since they don’t need a ladder or a safety net, the chances of falling off the trampoline are very low.

Brief History of Who Invented the Toaster

Who invented the toasting device? It seems like an easy question, but you would be astonished at how frequently it is answered incorrectly. When I recently posed this topic to my readers, over ninety percent responded with Charles Strite.

And while it is technically correct (because he invented the pop-up toaster), he did not invent the first electric toaster. The individual was Alan MacMasters. I recognize that MacMasters’s model was simplistic and somewhat unreliable, but I believe credit should be given where credit is due.

In order to provide you with a better grasp of the evolution of the toaster, let’s begin from the beginning.

As anticipated, toasters’ history begins with bread. In addition, archeological data suggests that the earliest use of flour dates back around 30,000 years. In reality, it is highly probable that ancient people also prepared flatbreads.

Furthermore? In Ancient Greece, bread was used as a sacrifice to the gods during rituals, in addition to its widespread use as a staple food in ancient civilizations.

However, bread as we know it today was likely originated in ancient Egypt. The Egyptians discovered that if they left their dough outside for a certain amount of time, it would rise. And when baked over an open flame, the bread would retain its raised shape. As they later discovered, this was due to yeast spores floating in the air and entering the dough.

In reality, the workers who constructed the famous pyramids of Giza were frequently compensated in part with loaves of bread. (Yes, the widespread notion that slaves constructed the pyramids has been discredited.) Archeological evidence demonstrated that the labor force consisted of entire families, not simply strong men (as would have been the case if the pyramids were constructed by slaves.)

Stop with the pyramids already!

At this time in Egypt, leavened bread was far more desirable than flatbread. However, there was only one issue. When left exposed to the sun for extended periods of time, the dough would grow incredibly tough, making it impossible to swallow.

What is the answer to this annoyance? Toasting. This further demonstrates that toasting was likely designed to preserve bread and not to enhance its flavor.

From then, the Romans copied the practice of burning bread, and it gained even more popularity. In fact, “toast” is derived from the Latin word “tostum,” which roughly translates to “to scorch or burn.”

Historically, bread was probably toasted by setting it on a hot stone or in front of a raging fire. From then, Romanians developed several devices for toasting bread over an open flame. These included sticks similar to those used to roast marshmallows over campfires and wireframes that would uniformly burn the bread slices. Inventing the First Electric Toaster

Alan MacMasters, a Scotsman, invented the first electric toaster in 1893. This initial iteration lacked a timer and used heated coils to toast bread. Consequently, the outcomes were frequently subpar and sometimes outright dangerous.

Related: 

The toaster’s toasting coils were a byproduct of cost reduction.

When MacMasters devised the device, he was employed by the London Underground. It was a lighting initiative. Therefore, the coils he used in toasters were originally designed for light bulbs.

In addition, the brand that manufactured them employed nickel in the manufacturing process, which created excessive resistance.

MacMasters and his partner production firm were forced to obtain new filaments since the filaments generated too high temperatures and hence could not be used in light bulbs. However, unwilling to concede defeat, the pair resolved to work together to discover how to utilize the early filaments.

After many hours of contemplation and several bottles of whisky, MacMasters concluded that the filaments were ideal for toasting. On a ceramic base, he affixed and encased them. Each model of his invention, named The Eclipse, featured four parts for toasting.

However, despite being a novel concept at the time, it had too many flaws. It was unable to shut down automatically, resulting in many fires and at least one death. In the same year, he was accused of being responsible for the death of a Guildford woman during a controversial trial.

She was caught in a house fire that began after she accidentally left her toaster on for too long. As anticipated, MacMasters refuted these allegations and placed the blame on the woman in question, claiming that she misjudged the temperature the toaster might reach if left unattended for an extended period of time.

When you combine these problems with the fact that power was not widely available at the time, you can see why the concept did not become popular at the time.

Nevertheless, 115 years ago (in 1905), two Chicagoans created a fire-resistant alloy that could endure the level of heat produced by a toaster. This meant that other innovators may now attempt to develop a more efficient and secure electronic toaster.

During this time, many electric toasters were invented. However, there was another issue. All models could only toast one side of the bread slice, requiring the user to manually turn the slices for the second side.

Fortunately for toastie aficionados, many innovations were introduced in the years that followed. These included the 1913-invented automated bread turner and semi-automatic toasters that could successfully turn off the heating components when the bread slices were properly toasted.

Approximately at the same moment, Charles Strite entered the scene.

Why did Charles Strite design the first pop-up toasters in 1919?

According to folklore, Charles Strite was employed at a factory in Stillwater, Minnesota when he first had the idea to revolutionize the toaster models used in cafes and restaurants across the United States.

Every day for lunch at the factory’s cafeteria, he was apparently tired up with receiving burnt toast slices. Therefore, he began to consider how he could improve the designs.

According to a separate story, Charles Strite was in a mall with his wife when he noticed the design of a toaster and began to consider how inefficient it was since it only toasted one side of the bread at a time.

Regardless of whether of the two is true, the ultimate effect is clear: he invented the first pop-up toaster.

When Strite began working on his invention in 1919, toasters were not extensively used in households. Still, they were unreliable, as someone had to monitor the toasting process to ensure that the bread would not burn.

And in Strite’s situation, it is likely that cafeteria workers did not have time to stand about and wait for toasties to be toasted, which explains why he always received toasties that were burnt.

What improvements did Charles Strite’s make to the electric toaster?

Before the invention of Charles Strite’s model, electric toasters could only brown one side of bread slices at a time (even though the turning was automatic.) However, Strite registered a U.S. patent for a toaster that could not only toast both sides of the bread slices simultaneously but also prevent them from burning if you were not paying attention (thanks to the pop-up system.)

The retail version of Strite’s toaster included a timer with a mechanism that helped toast pop up and out of the toaster when it was done toasting. In truth, Strite’s mechanism is still utilized in the majority of pop-up toasters, if not all.

Strite applied for financial banking and founded the Waters-Genter Company in order to market his new innovation. Initially, he sold his pop-up toasters primarily to cafés and restaurants in the United States. But the invention was so popular that by the end of 1926, in response to public demand, the first home-use pop-up toaster was introduced.

The new home model also had a control lever for adjusting the amount of toasting on bread slices. In reality, this was another significant advancement in the field of toasters.

The Development of Sliced Bread

While Charles Strite was inventing a product that would later take the globe by storm, another man from Davenport, Iowa was working on a device that would make grabbing toast in the morning even simpler. This individual’s name was Otto Frederick Rohwedder.

In 1912, he began developing a prototype for his bread slicer, but his machine and designs were destroyed by a fire in 1917.

The man then attempted to acquire money to restart development on his prototype, but since the concept of sliced bread was unpopular among bakers, he was unsuccessful. This is despite the fact that his innovation inspired the well-known expression “the greatest thing since sliced bread.”

Bakers were concerned that the bread might become stale before being sold. In addition, it was believed that the drop in shelf life would not be well welcomed by consumers regardless of the quality of the packaging.

In 1927, Rohwedder was able to repair his equipment and even produce a model that was suitable for use in actual bakeries. As you may have predicted, this coincides with the invention of the first home pop-up toaster.

From that point forward, everything became part of history.

Conclusion

If you appreciate this material and want to learn more about toasters or invest in a quality model, I have numerous blog pieces that I think you will enjoy.

Seemore: Best website for kitchen review.

Can A 4k Monitor Run 1440p

Difference Between Them

A display’s resolution is measured in 4k and 1440p. The order is as follows: 480p, 720p, 1080p, 1440p, 4k, etc. As can be seen, 1440p falls  between 1080p and 4k. So, can a 4k-monitor run 1440 ?

A 4k display can run 1440p resolution because it has a greater resolution than 1440p. The image clarity and quality, on the other hand, will be determined by the monitor’s intended use. You can receive a pleasing image quality or a hazy image quality depending on your activity.

  • Pixels And Video Resolution

If you understand what pixels are, you can better grasp video resolutions. Pixels determine how good a video resolution is. Pixels are the tiniest visual units that make up the entire image.

As you can expect, the more pixels in an image, the clearer and better the image becomes. Video resolution is the height and breadth of a display in pixels.

Can 1440p be displayed on a 4K monitor?

The image quality is measured in resolutions. Because it contains more pixels, a 4k quality will be better than a 1440p quality in terms of order. The visual quality drops when 1440p is used on a 4k monitor.

A 1440p monitor will display a 1440p image that is clearer and of higher quality. On a 4k monitor, the same image will not look as good.

The details are everything on a 4K monitor. On a 4k panel, any game or video will display all of the fine details. When playing games, the image quality grows so great that you receive the most lifelike experience possible.

The argument is that if you buy a 4K display, using it at 1440p defeats the purpose. In this case, a 1440p monitor would be a better choice because it is less expensive and can provide a higher frame rate.

Can my display, on the other hand, support 1440p? Yes, monitors with 1440p resolution are excellent for gaming. If gaming is a secondary requirement for you, a 4k monitor is a better option. Although the differences in quality are minor, gamers will undoubtedly prefer a 1440p display when playing 1440p games.

  • Monitors with 1440p vs. 4k resolution

Both types of monitors have advantages and cons. Overall, which one is best for you depends on your activities.

4K monitors provide exceptional image quality. It’s an excellent pick for players who value accuracy. When comparing image quality between 1440p and 4k, you’ll find that 4k monitor visuals are more lifelike.

There is almost no blurriness, and all of the details on the screen are quite visible. The best thing about a 4k monitor is this.

However, there are drawbacks. A 4k monitor necessitates a high-end GPU, which is expensive. A 4K display is quite costly in and of itself. A 4k monitor isn’t something you should consider if you’re on a tight budget.

To play a game without difficulty, you’ll need at least 60 frames per second on any monitor. However, to achieve 60 frames per second with 4k resolution, you’ll need the most expensive hardware available.

Because the resolution on 1440p monitors is smaller, the frame rate naturally increases. Fps is one of the most important factors to consider when purchasing a monitor, particularly for gamers.

  • Gaming On A 4k Monitor

The resolution and clarity of the image are highly dependent on the game you are playing. When switching from high to medium game quality, the difference can sometimes be subtle. You may increase the resolution and still enjoy the game.

When you adjust the game quality, some games will appear graphically dreadful. For certain games, you can drop the resolution and increase the quality to high or ultra.

Before you start playing, you’ll need to figure out which one demands which. Fortunately, 1440p on a 4k monitor is acceptable. You shouldn’t have any problems doing so.

4k is the best resolution for gaming, but only if you have the best GPU to run it at a good frame rate. Image quality and detail are unquestionably important. However, if the frame rate isn’t good enough, you won’t be able to play the game smoothly.

To summarize, if you want to operate a 4k monitor at its highest resolution, be sure you have everything you need. If the outcome isn’t ideal, there’s nothing stopping you from purchasing a less expensive monitor.

So, if you’re thinking about buying a new 4K display, think about other less expensive models that might better suit your needs. If you’re buying a monitor for other reasons and won’t be using 1440p on a regular basis, a 4k display is a better option.

The scale is the reason for this entire dispute. In comparison to 4k and 1080p, 1440p has a fragmented scaling. To put it another way, you can’t divide 1440p pixels evenly on a 4k panel.

That’s why downscaling on a 4k panel will have some visible drawbacks. It is, nevertheless, completely usable. It’s all about your priorities.

  • How to Make 4K to 1440p Downscale Monitors

Users should check their screen specifications for the pixel per inch (PPI) or pixel per square inch (PSI), which should be higher on 1440p screens than on downscaled 4K panels.

It’s simple to verify this simply looking at a regular-sized piece of text. If the display appears blurry or grainy, it’s best to contact the manufacturer because it might not be native 1440p.

1440p monitors with high refresh rates are popular among gamers who want the best of both worlds. When a downscaled 4K display is nestled within a 4K TV, customers aren’t getting what they paid for.

Is it possible to watch 4K on a 2K monitor?

Is it feasible to watch 4K movies on a 2K resolution display? The video resolution is generated by the graphics processing unit (GPU) in your computer or laptop, just like any other resolution.

At other words, if you increase the resolution to 4K on sites like YouTube, you’ll get a 4K video signal from your PC if the video is in 4K quality. No matter what, your display device will pick up this 4K video signal and play it back.

The highest resolution of your display device, however, determines the video quality you view on your screen.

FAQs

  • Is a 1440p Monitor Capable of Displaying 4K?

The pixel density of your display will be affected if the monitor you’re using is higher than this. This means that a 4K image’s highest resolution will be 1440p, while an 8K image’s maximum resolution will be 1080p, removing 360 pixels and thus 360 pixels’ worth of information.

Yes. When employing this resolution, 4K at 1440p means more than one media pixel for each display pixel.

  • Is It Possible To Play 1440p On A 4K Monitor?

To put it another way, 1440p on a 4K screen will be significantly fuzzier than 1440p on a native 1440p screen. It becomes less obvious as the resolution increases.

This isn’t the ideal option for reading fine text, but it shouldn’t be an issue for video games. It’s a tad grainy while playing 1080p on a 1440p screen.

CONCLUSION

If you haven’t purchased a monitor yet, I strongly advise you to reconsider your decision. can a 4k-monitor run 1440 ? Why would you buy a 4k monitor in the first place if you’re going to lower the resolution?

You can save a lot of money by choosing a monitor with a lower resolution. 4k resolution is required not only on the display but also on the other powerful components. If you really want it, however, consider running 4k resolution on a 4k display to get the most out of it.

See more :

bestreviewmonitor

BEST 38-INCH ULTRAWIDE MONITORS

Best 29-Inch Monitors

Best 34-Inch Curved Monitor For Work

Can I Connect a DSLR Camera to an External USB Microphone?

 

Beyond its capacity to produce spectacular images and video, a DSLR camera’s capacity to record high-quality audio is one of its key advantages. The camera’s built-in monaural microphone has generally disappointed professional and amateur filmmakers, vloggers, and content producers. I prefer to have the option of using an external stereo microphone to capture clear, sharp sound.

Most people are unaware that a USB microphone, like the Blue Yeti, can also be attached to a DSLR camera, such the Canon EOS Rebel SL3. External USB microphones are intended to be connected to computers via USB.

You must adhere to these instructions if you want to connect your USB microphone to a DSLR camera. First, check to see if your DSLR camera has a 3.5mm mic input and your USB microphone has a 3.5mm headphone output. Next, you’ll need a computer, a 3.5mm male-to-male stereo audio cable, and the USB cable that was included with your microphone.

How to Connect a USB Microphone to a DSLR

You need to connect the audio cables and power the microphone now that your hardware is assembled.

  1. Join the microphone’s 3.5mm headphone output to one end of the 3.5mm male-to-male audio cable.
  2. Connect the other end of the 3.5mm male-to-male audio cable to the 3.5mm microphone jack on your camera.
  3. Use the USB cord that came with your microphone to connect it to a computer to power it.

The Best Ways to Avoid Digital Distortion

All of the components of a conventional microphone are included in a USB microphone. However, it varies in that it has an integrated preamplifier and an analog-to-digital converter that enables audio to be recognized by the recording software on a computer. The microphone’s integrated preamp can emit a very high signal and result in digital distortion in your recording as we are bypassing the computer as the recording device. We have to change the audio levels in the camera to stop that from happening.

  1. On your camera, select Menu from the menu. As you would have suspected, this is where you can alter many camera settings, however some might not be available if your camera is in auto mode.
  2. Choose “Sound Recording” from the menu on the screen. You can choose between Auto, Manual, and Disabled sound recording modes using this. Put the Sound recording in “Manual” mode instead of “Auto.”

Automatic Gain Control (AGC), which can automatically boost the audio volume and cause a lot of buzzing and interference in your recordings, can occur if the camera is left on Auto.

How to Set the Levels for Your Recording

Poor sound can arise from recording audio in your camera at the wrong volume levels. The Recording Levels can be adjusted as shown here.

  1. Click on “Rec. level.”
  2. Depending on how close the subject is to the camera, drag the slider all the way to the left using the D-pad or touch screen. To save, click “Set.”

We can now adjust the volume level or gain on your actual microphone. Hold the microphone in your hand.

  1. Speak into the camera while keeping an eye on the left and right audio levels in decibels (dB).
  2. Your microphone’s gain control is readily accessible.

The sound should ideally peak right below the green bar, in the -12 range. You can use a DSLR camera and your external USB microphone to record latency-free audio after completing that step.

Is Every USB Microphone the Same?

You need to decide how you’ll utilize the USB microphone before you choose one. Not every USB microphone is the same. Others are better suited for podcasting or music recording, while some are made specifically for live streaming video games.

The three most frequent applications for a USB microphone are:

  1. Gameplay and live streaming
  2. Podcasting
  3. Recording music

USB microphones come with a variety of features and customization choices. For instance, the Blue Yeti USB Microphone offers a variety of polar patterns (cardioid, stereo, omnidirectional, bidirectional).

How to Connect a USB Microphone to a DSLR

You need to connect the audio cables and power the microphone now that your hardware is assembled.

  1. Join the microphone’s 3.5mm headphone output to one end of the 3.5mm male-to-male audio cable.
  2. Connect the other end of the 3.5mm male-to-male audio cable to the 3.5mm microphone jack on your camera.
  3. Use the USB cord that came with your microphone to connect it to a computer to power it.

The Best Ways to Avoid Digital Distortion

All of the components of a conventional microphone are included in a USB microphone. However, it varies in that it has an integrated preamplifier and an analog-to-digital converter that enables audio to be recognized by the recording software on a computer. The microphone’s integrated preamp can emit a very high signal and result in digital distortion in your recording as we are bypassing the computer as the recording device. We have to change the audio levels in the camera to stop that from happening.

  1. On your camera, select Menu from the menu. As you would have suspected, this is where you can alter many camera settings, however some might not be available if your camera is in auto mode.
  2. Choose “Sound Recording” from the menu on the screen. You can choose between Auto, Manual, and Disabled sound recording modes using this. Put the Sound recording in “Manual” mode instead of “Auto.”

Automatic Gain Control (AGC), which can automatically boost the audio volume and cause a lot of buzzing and interference in your recordings, can occur if the camera is left on Auto.

How to Set the Levels for Your Recording

Poor sound can arise from recording audio in your camera at the wrong volume levels. The Recording Levels can be adjusted as shown here.

  1. Click on “Rec. level.”
  2. Depending on how close the subject is to the camera, drag the slider all the way to the left using the D-pad or touch screen. To save, click “Set.”

We can now adjust the volume level or gain on your actual microphone. Hold the microphone in your hand.

  1. Speak into the camera while keeping an eye on the left and right audio levels in decibels (dB).
  2. Your microphone’s gain control is readily accessible.

The sound should ideally peak right below the green bar, in the -12 range. You can use a DSLR camera and your external USB microphone to record latency-free audio after completing that step.

Is Every USB Microphone the Same?

You need to decide how you’ll utilize the USB microphone before you choose one. Not every USB microphone is the same. Others are better suited for podcasting or music recording, while some are made specifically for live streaming video games.

The three most frequent applications for USB microphones

  1. Gameplay and live streaming
  2. Podcasting
  3. Recording music

USB microphones come with a variety of features and customization choices. For instance, the Blue Yeti USB Microphone offers a variety of polar patterns (cardioid, stereo, omnidirectional, bidirectional).

How to remove bearings from roller skate wheels?

Since you’ve been roller skating for a while, you might notice that your skates move slower. If so, you might want to find out how to clean roller skate bearings. But first, you need to learn how to take the bearings out of the wheels of your roller skates so you can either replace them with new bearings or clean them.

To start, you need good, clean bearings in the wheels of your roller skates if you want to roller skate. And if you don’t take good care of them, dirt and other debris can get stuck in them and slow you down, as well as damage the bearings.

Don’t worry if you can’t get the bearings out of your roller skate wheels or if you have a hard-to-handle bearing spacer. I’ve put together some suggestions to help you. With some patience and hard work, you’ll be able to get those bearings out in no time.

 

What Tools Will You Need?

You’ll need a few basic tools before you can start:

A socket wrench set, an Allen wrench, a socket screwdriver, or a wrench: You will use one of these tools to take off the axle nuts that hold the quad wheel to the skate axle. To remove the axle screw that holds your inline skate wheel in place, you’ll need an Allen wrench and inline skates.

Then, choose one of these sets of tools:

A bearing puller: This is a special tool for removing bearings from skate wheels.

A bearing press : special skate tool that makes it much easier to put in and take out skate bearings.

A hammer and a screwdriver with a flat tip: You’ll use the flathead screwdriver and the hammer to gently tap the bearing out of the wheel.

Or you can skip all the other tools and just use the axle from your skate! (for quads only)

Lastly, grab an old rag or some paper towels because removing bearings is messy and greasy.

How to remove bearings from roller skate wheels?

We can start now that you have everything you need. Here are four ways to take the bearings out of the wheels of roller skates:

  1. Use a puller for bearings

This is the most common way to take out roller skate wheel bearings. A bearing puller is a tool that grabs the bearing and pulls it out of the wheel. It can also help put the bearing back into the wheel by pushing on it.

Step 1: Take your skates’ wheels off.

First, use your wrench or socket screwdriver to take off your skates’ axle nut or screw. Turn it the other way to loosen it. Then, take your skate’s wheel off.

Step 2: Put the bearing puller in place.

Next, take your bearing puller and push down on the button on top of it. This makes the two prongs on the bottom of the tool pull in, so you can put the puller inside the first bearing in your wheel.

Remember that each wheel has two bearings. Let go of the button on top of the tool once the tool is in place. You can now get a vice-like grip on the bearing tool by pressing out the two prongs.

Step 3: Twist and pull.

Now comes the hard work! With one hand on the wheel and the other on the bearing puller, twist and pull on the puller until the bearing comes out.

Depending on how tight your wheel bearings are, this could take a little work. Sometimes they’re easy to get out, but sometimes they’re a real pain. Just turn and pull slowly until they let go.

Once you’ve taken out the first bearing, turn the wheel over and do the same thing on the other side. Do this with each wheel until you have taken out all of the bearings.

  1. Get a Bearing Press

A bearing press is another great way to get the bearings out of skate wheels. The Sure-Grip Bearing Press is a good skate tool that not only lets you take out bearings, but also makes it easy to put them back in.

The little hook on the front of the bearing press can be used to pull the bearing out of the wheel.

Then, the inside of the press has a part that has a swinging arm. You put a bearing on the press, then your wheel (which doesn’t have any bearings in it), and then you put a second bearing on the press. You pull down on the handle and then push down on the arm, and voilà! You press the bearings into the wheel.

 

It’s a useful tool that can fit in most skate bags because it’s small. I keep it in mine and bring it with me whenever I go skating, just in case.

3: Back to school! Use a hammer and a screwdriver to fix it.

 

The good old hammer and screwdriver method is another common way to get the bearings out of roller skate wheels. This is how I used to take out bearings when I was younger… and it works great even now. You do need to be careful not to hammer too hard, or the bearings could get damaged.

Step 1: Take off your skates’ wheels.

First, use a wrench to take the wheel off your skates. Put the wheel on the ground or a table so that it is flat.

Step 2: Put the screwdriver into the hole for the bearing.

Then, slide the screwdriver through the top bearing and down to the bottom bearing. I find that it works best to put the flat part of the screwdriver against the bearing on the bottom of the wheel. Check to see that the screwdriver isn’t moving.

Step 3: hit the screwdriver with a hammer.

Now is the time to start swinging the hammer. Hold the screwdriver in place and lightly tap it with the hammer a few times. The goal is to push the bottom bearing out of the wheel.

Start with a light tap. If you can’t get it off, tap it with more force. The important thing is not to hit it so hard that you damage the bearing, unless you are going to throw these out and get new ones. Then go ahead and pound away! 4. Take off the bearing.

The bearing will start to come out after a few good hits. Tap it until it comes out all the way.

4: Use the axle of your skates (Quads Only)

You can take the bearings out of roller skate wheels without any tools if you have to. Here is a good video from Roller Skate Nation that shows how to do this on skates.

Basically, you use the axle of your quad skate as a tool to pry the bearing out of your wheel.

I personally prefer to use one of the three methods above, but this works too if you need to get a bearing out of a wheel but don’t have any tools with you.

What Obstacles Do I Have to Get Past?

Taking the bearings out of roller skate wheels can be tricky, but you can do it with a little patience. Here are some things you should remember:

Make sure you have what you need to do the job. The most common tools for this job are a bearing puller, a bearing press, a hammer, and a screwdriver.

Don’t rush. Taking out bearings can be tricky, but you can do it if you take your time.

Never use heat to try to remove or clean a bearing. Don’t use a hair dryer or any other heating element near bearings because it can damage them.

With a little patience and the right tools, you’ll be able to take bearings out of roller skate wheels like a pro!

 

Do LG Smart TVs Have Bluetooth

Modern homes increasingly feature smart TVs. 70 percent of all new TVs sold in 2018 had “Smart” capabilities, according to Consumer Reports. TVs with built-in Wi-Fi or Bluetooth connectivity are incredibly popular because they allow you to easily connect your TV to a wide range of streaming services and peripheral devices.

The vast majority of LG’s new TVs are “smart,” which means they all have Bluetooth built in. LG currently offers a wide variety of televisions, from OLEDs to 8K models.

Using Bluetooth with your LG TV is covered in great detail in this article. No smart TV? No problem! We’ll show you how to connect a Bluetooth device without one, and we’ll go over the various LG smart TVs currently available to see what they have to offer.

 

Can I Connect a Bluetooth Device to a Non-Smart TV? 

 

Although many non-smart TVs are Bluetooth-enabled, this is not always the case. You may be able to connect a non-smart TV to certain Bluetooth audio devices, but you’ll need the right adapter to do it.

Fortunately, there are a number of Bluetooth adaptors that may be used with older televisions. In order to use these adaptors, you need to plug them into your TV’s audio output ports. A non-smart TV can be used to play back audio through headphones, speakers, or sound bars connected in this manner.

Adapters for a variety of audio output connectors, including as optical, coaxial, 3.5mm, and RCA, are readily available. Before you buy an adaptor, make sure you know what type of audio output your TV has.

We’re afraid you won’t be able to connect a Bluetooth device such as a wireless keyboard or mouse to a non-smart TV. Most non-smart TVs lack the internal hardware to support a Bluetooth connection, despite the fact that USB Bluetooth adapters are available.

You cannot connect a Bluetooth device that isn’t an audio receiver to a TV that is not smart. The HDMI port on your non-smart TV can be used to connect a PC or laptop, and then you can connect your Bluetooth devices to the computer.

How Do I Connect a Bluetooth Device to My LG Smart TV? 

 

Connecting a Bluetooth device to any kind of smart TV isn’t always a self-explanatory process. In this section, we’ll walk you through how to connect different types of devices to your LG smart TV via Bluetooth. 

 

Connecting an Audio Device to Your LG Smart TV 

 

This is true for both speakers and headphones, as well as sound bars. In spite of the fact that the exact product that you possess might call for a few somewhat different actions to be taken in order to have it connected to a smart TV, in general, this is what you need to do in order to connect any audio device to your LG TV via Bluetooth:

Bring up the menu for the Settings on your TV.

Launch the Sound Output menu from the Settings menu on your device.

Within the menu labeled “Sound Output,” locate the “Bluetooth” option, then make your selection there. This will enable your TV to connect to any Bluetooth-enabled devices that are currently in range.

Find the button that says “pairing” on your Bluetooth device, then press and hold it until the device goes into the pairing mode. Because the pairing mode can be activated in a variety of ways depending on the device, you should follow the instructions that are specific to your gadget.

At this point, the Bluetooth device you have should be visible on the list of devices that is displayed on your TV. When it does, select your device from the list, and it ought to connect to your TV automatically.

To unpair a device, go to the list of Bluetooth devices that you have linked with your TV in the settings menu, identify the device that you want to unpair, and then press the button labeled “unpair.”

Connecting a Wireless Keyboard to Your Smart TV 

 

There are a few major distinctions, but in general, the process of connecting a keyboard to your LG TV is very similar to the process of connecting an audio device to your TV. However, there are a few more steps involved. Using Bluetooth, you can connect a wireless keyboard to your television in the following manner:

Put the keyboard you’re using into the pairing mode. Again, the appropriate technique for doing so will be determined by the particular keyboard that you have.

Launch the Settings menu on your TV, and then select Advanced Settings from the list of available options.

To change your keyboard settings, go to the General section of the Advanced Settings menu and then pick Keyboard.

Choose Connect from the available options under the Keyboard menu. After that, you ought to get a list of the accessible devices.

To connect your keyboard to your TV, select it from the list that appears.

 

Current LG TVs: An Overview 

 

We’ve already noted that LG has a wide choice of TV models in four main categories. OLED TVs, NanoCell TVs, 4K TVs, and 8K TVs are just a few of the options available.

To help you better understand these four categories, we’ve broken down the differences between them and what each category can give you in terms of performance.

 

LG OLED TV 

 

Since its introduction on the market in 2013, OLED (Organic Light Emitting Diode) technology has been relatively new. Using an OLED TV, each individual pixel can be individually manipulated, allowing the screen to generate deeper blacks and brighter colors with more contrast.

OLED TVs run more smoothly than normal LED LCD TVs, which is advantageous when watching something with a lot of quick motions (like an action movie or a sports match). In a dimly lit room, an OLED TV will provide you a better picture than an LED LCD TV.

 

LG NanoCell TV

 

LG invented the NanoCell technology, which is a patented LG invention. In a nutshell, NanoCell technology is utilized to remove undesired light wavelengths from red and green dyes, resulting in more vibrant colors. Just know that NanoCell technology can display more colors than a typical LED LCD TV if all this is still too confusing.

When it comes to overall picture quality, NanoCell TVs are superior to ordinary LED LCD TVs, but inferior to OLED TVs. But they’re cheaper than OLED TVs, so that’s a plus.

LG 4K TV 

 

To begin, let’s get one thing straight: when discussing televisions, the term “4K” simply refers to the resolution of the screen; it does not refer to the technology that is employed in the production of the real image. A picture with a 4k resolution has a resolution of 3840 by 2160 pixels, which is equivalent to having four times as many pixels as a picture with a full HD resolution (a.k.a. 1080p).

LG develops and markets a wide selection of 4k televisions, some of which are equipped with OLED technology while others are not. The level of information that each of these televisions is capable of displaying is not what differentiates one from the other; rather, the quality of the colors is.

 

LG 8K TV 

 

A reminder that the term “8K” refers exclusively to the resolution that the television is capable of displaying. 8K televisions feature a resolution of 7680 by 4320 pixels, which is four times as many pixels as 4K televisions.

The primary benefit of having a higher resolution is that it can produce a picture that is sharper than having a lower resolution. Additionally, having a higher resolution makes the individual pixels in an image much less obvious when compared to having a lower resolution. It should come as no surprise that 8K televisions are also among the most costly TVs currently on the market.

 

CONCLUSION

 

Because more and more people are expecting higher levels of connectivity from the gadgets they use, it is only natural that smart TVs are gaining popularity at a faster rate than ever before. You should be able to connect a number of devices to a good smart TV using Bluetooth or WiFi. The greatest smart TVs allow you to pair your TV with a virtual assistant device such as Amazon Alexa or Google Home.

However, even if you do not have a smart TV, there is a good chance that you will still be able to connect it to a Bluetooth audio device or a media player such as a Roku. This should provide you with a significant portion of the functionality of a smart TV at a price that is significantly less expensive.

See more :

Best 29-Inch Monitors

 

Coaxial Vs. Component Speakers in Cars – Which is Better?

When building or upgrading car audio systems, you will come across two types of speakers: coaxial and component. Coaxial speakers are the most common type of speakers on the market, and most car stereo systems come with them. Component speakers are popular with people who build car stereos and are known for making better sound.

How are these two types of car speakers different, and which is better? Read on to get a better idea of what I mean. I’ve also put in a section about how to choose car speakers. Enjoy.

How do coaxial speakers work?

Coaxial speakers, also called “full-range” speakers, have the same kind of drivers as component speakers. But, to save space, the drivers in a coaxial speaker are all in one piece. Coaxial speakers can be set up in two main ways. One is a small design with two, three, or even four speaker drivers, which is often used for car audio. The other is a high-power, two-way design that is used in professional audio. These are also called single-source or dual-concentric loudspeakers.

There are either 2-way or 3-way coaxial speakers in cars. A tweeter is usually placed on top of a woofer in 2-way speaker designs. The three speakers in a 3-way speaker design, also called a tri-axial speaker, will be a tweeter, a mid-range speaker, and a woofer. Besides these two common types of car speakers, there is also a 4-way speaker design. A super tweeter is an extra speaker driver that comes with a 4-way speaker. The super tweeter is in charge of handling sounds with very high frequencies.

Almost every OEM car stereo system has coaxial speakers. This type of speaker is the most popular because it is cheap, easy to set up, and usually doesn’t need many extra parts to make good sound. Coaxial speakers come in different sizes that fit most cars and are easy to put in yourself if you want to upgrade your car’s sound system.

But coaxial speakers have some problems, one of which is that they don’t sound very good. Even though listening to them is still enjoyable, the best full-range speakers can’t compete with the best component speakers. When the tweeter, mid-range speaker, and woofer are all mounted together, the sound quality usually gets worse. This is because of problems caused by the woofer in the back. But thanks to modern technology, some of these problems aren’t as bad as they used to be.

How do Component Speakers Work?

Separates is another name for component speakers. Component speakers are different from coaxial speakers in that they have separate speaker drivers for each part of the frequency response. This is done with a crossover, which splits the sound signal and sends each part to the right driver so that sound can be heard. A component system usually has two tweeters, two woofers, and two crossovers. The crossovers are set so that the tweeters get the highest frequencies (called treble) and the woofers get the lowest frequencies (called bass). Midrange speakers are added to fill the space between the high and low speakers.

Component speakers sound better in stereo than coaxial speakers once they are installed in a car. Most of the time, the woofer or subwoofer is mounted in the truck or in a place like the door where it came from the factory. Tweeters are placed close to where a user’s ear is. This gives you a better sound stage and surround sound, as if the musicians were right in front of you.

Component speaker setups are also better at being modular, which means that users can easily change and upgrade individual parts. There will be a subwoofer, mid-range speakers, and tweeters in a complete component speaker system. This set-up makes it easy to add new speaker drivers or upgrade the ones that are already there, depending on the user’s needs.

The cost of the system and the work to put it together is a drawback of component speakers. Even if you do the installation yourself and are willing to learn, it still costs a lot to get a good set of components up and running. Aside from speakers and crossovers, car amplifiers and car equalizers also help make the sound as good as it can be. With amplifiers and equalizers, a car audio system can also be set up in a more personal way.

Component speakers vs. coaxial speakers

Component speakers and coaxial speakers both have their pros and cons. Read what’s below before you decide which of these two types of car speakers to get. I’ve put together a list of a few things that will help you decide between component and coaxial speakers.

  1. Size & Fit

Most coaxial speakers fit easily into the places in your car where speakers are supposed to go. This is why there are so many more coaxial speakers on the market than there are component speakers. Since most car manufacturers also use coaxial speakers, all you have to do to improve the sound in your car is buy new speakers. Component speakers are similar to coaxial speakers in size and shape, but you will need to do research to find one that fits your car.

  1. Budget

The prices of coaxial and component speakers are not that different. But if you are on a tight budget, coaxial speakers are always the best choice. Your budget gives you two reasons to choose coaxial speakers.

First, coaxial speakers are easy to set up, even for people who have never done it before. You don’t need to hire a pro to put coaxial speakers in your car because it’s easy to do it yourself. So, you save money, and if you like doing things yourself, this might be worth a shot. Second, you don’t need anything else besides the speakers to make them sound good. There’s no need to add amplifiers, equalizers, or even crossovers to improve the sound.

In addition to being expensive, component speakers may also require you to change the interior of your car to fit them and get the best sound. For a beginner or someone on a tight budget, the price is just not good.

  1. Customization

Component speakers are the best choice if you like to do things yourself and want to build your own car stereo. This is because they can be put together in more ways. So, you can upgrade individual parts over time until you have the car audio system you want. You can’t upgrade just one of the speakers in a set of coaxial speakers because they all come as one unit. So, you will have to find another speaker to replace the one you already have.

  1. How the sound is

Component speakers have better sound quality because each speaker driver is designed to handle a certain range of frequencies. Crossovers are used to make sure that the right frequencies go to the right speakers. The subwoofers handle the low end, the tweeters handle the high end, and the midrange speakers handle everything in between.

Adding things like a car amplifier or equalizer also makes the sound better as a whole. Car amplifiers give the power that the speakers need to sound their best. On the other hand, an equalizer lets the user change the way the sound is reproduced to suit their own tastes. It also helps control frequencies that are lowered or raised because of the shape of the car, the materials used to build it, or other things. Find out more about equalizers for cars.

Component speakers usually sound better than coaxial speakers, but the best coaxial speakers can also sound pretty good.

FAQs

Why do speakers with separate parts need an amp?

In car audio systems, a signal that is too weak to drive speakers is picked up by an amplifier and made stronger so that it can drive speakers. Even though a car’s head unit has an amp built in, the amp isn’t always strong enough to drive component speakers well. Remember. Passive speakers don’t have their own amplifiers, so they are also called “component speakers.” So, the audio signal needs to be amplified by an amplifier before it can go into a component speaker and make sound that a user likes.

Does a sound amplifier make the sound better?

Yes. Amplifiers take the signal from your car stereo and turn it into a strong signal for the speakers. An amplifier makes the sound in your car better by turning up the volume to a level that can be heard without getting too distorted.

What is a speaker woofer?

A woofer is a type of speaker that is made to handle the low end of the sound spectrum. There are different kinds of woofers, and even though they are all made in a similar way, they are not all the same. They are the standard woofer, the subwoofer, the mid-woofer, and the rotary woofer.

What does a midrange speaker do?

Midrange speakers, like woofers, are made to handle midrange frequencies. Most sounds, like the human voice and most musical instruments, are in the midrange. Midrange speakers often sound dull or flat because they can’t play both high and low frequencies. But if you add a woofer and a tweeter, you’ll get the best sound.

How do you get speakers to work?

Many people have said that the break-in process is good for speakers. To break a speaker in, all you have to do is play music. But you should play something with a wide range of volume, like something with strong bass and strong highs. If you play music louder than most people do, it will help break in happen faster.

Conclusion

Both component and coaxial car speakers have their pros and cons. Your choice between these two types of speakers, though, will depend on what you like. Coaxial speakers are a good choice if you want to save money and set them up quickly. Component speakers are the best choice if you want to be able to change the sound and make it sound better.

Have I forgotten anything? If so, leave a comment below, and let’s keep talking.

 

Size Doesn’t Matter! The 10 Best Mini Electric Skateboards!

Does size matter?

A question that has been asked since the beginning of time.

Everyone wants to get bigger, faster, and stronger.

But does that mean electric skateboards are different?

After all, there are some e-boards on the market today that are pretty crazy in how well they work.

Just look at the Evolve Carbon GT, Enertion Raptor 2, Boosted Stealth, or Meepo V3.

Each board is both very fast and very long.

Don’t get me wrong, high performance is important, but almost all of the electric skateboards that are making waves in the market right now are longboards that are big, heavy, and bulky.

Some of these boards can weigh 30 pounds or more.

Unless you’re riding it, you’re probably carrying it. And if you don’t have a custom backpack to carry that big board, you’ll have a terrible time walking around town.

Where are all the smaller, lighter boards that you can take with you?

It turns out that there are a few for sale. Almost every brand of electric skateboard makes a “mini” version of their board.

Don’t believe me?

If you go to any website for an electric skateboard, you’ll see that each company makes its own mini board (s).

  • Meepo
  • Ownboard
  • Boosted
  • Evolve
  • WowGo

Some small boards are so small and look like they were made for kids that they are called “penny boards.”

Why might you want to buy a mini or penny e-board?

The first thing to do…

Why would you even think about buying a board that is so small?

After all, we already know that e-boards that look like longboards usually work better and are easier to ride…

Let’s talk about what’s good.

How much it weighs and how easy it is to carry

A very important thing to think about when buying a board of any size.

A 40-inch longboard with a battery the size of Texas will weigh a lot more than a mini electric skateboard.

When your board dies, weight is a very important factor. A dead board is no longer useful. The next thing you know, you’re riding around the city and carrying around the world’s heaviest paperweight!

You might also have to carry your skateboard in places where skating isn’t allowed. Schools, busy sidewalks, private property, and other places may not let you skateboard, so the only thing you can do is pick up your board and carry it by hand.

With a mini e-board, you can carry it by hand without too much trouble.

Just think about this.

Picture picking up a 15-pound dumbbell and walking all over New York City.

Now, imagine picking up a 25-pound dumbbell and walking across the city.

Even though 10 pounds might not seem like much, trust me, you’ll notice a difference right away. That’s what it’s like to carry a heavy electric longboard instead of a smaller, more compact mini board.

Easier Travel

As with portability, it’s hard to travel with a big board.

If you want to bring your board with you on a trip, it probably won’t fit in a suitcase.

That means you’ll have to carry it with you when you’re not using it.

An electric skateboard will take up a lot of room in your trunk, so the best thing to do is choose the smallest board you have.

Length and Ability to Move

Electric skateboards that are smaller will be easier to move around on.

Larger longboards are usually easier to control and ride more smoothly, but you are much more likely to hit something, especially in tight spaces.

I’ve had to pass a few people when I was riding on a sidewalk.

When your board is 40 inches long, it will be much harder to get around a tight group of people or any other obstacles.

On the other hand, mini electric skateboards that are less than 30 inches long will help you get into tight places.

Price

There’s no doubt that electric skateboards aren’t cheap.

But mini electric skateboards won’t hurt your wallet nearly as much.

Most of the time, they cost $300–$500 less than electric longboards that do the same thing.

This is a very important thing to think about when buying your first board.

When I was looking for my first e-board, I thought spending more than $700 was too much.

Less materials are used to make a smaller board, which can explain why it costs less.

Companies are also figuring out that there is a market for boards that are smaller and take up less space.

Not everyone just wants the biggest, fastest, and baddest board. In the industry, people’s age groups and interests are changing.

If you don’t want to spend a lot of money, you might want to buy something smaller.

How do small e-boards perform compared to bigger ones?

You might not believe it, but smaller electric skateboards have a lot more power and speed than electric longboards.

The deck is often the only thing that separates a company’s mini e-board and longboard.

Since you can swap the battery between the two, the performance of the smaller and bigger boards is often the same.

Think about Ownboard, a company that makes electric skateboards.

The batteries they make for all of their boards are pretty much the same and can be used in any model. (Even though some boards offer batteries of different sizes.)

The Dual Hub 250W motor and battery options for the Ownboard Mini KT and the W1S are the same. The only difference between them is the length of the deck.

How did it turn out?

These two boards have the same top speed, range, ability to go up hills, etc.

This means that you don’t have to sacrifice performance in exchange for a smaller size.

Let’s move on to Boosted.

It turns out that all of Boosted’s boards can be used with either one of two different batteries.

  1. A “standard battery” with 7 miles of range.
  2. A “long-range” battery that makes the range go up to 14 miles.

Most of the time, their batteries work with all other models and can be switched out. Just like with the longer deck boards, a battery with a longer range can be added to a smaller board.

This means that if you buy a smaller board like the Boosted Mini X, which is 29.5 inches long, it will work about the same as the Boosted Stealth, which is 38 inches long.

The motor power and length of the deck are the only things that make each model different.

One point for the little boards!

Which models of mini electric skateboards are the best?

Now is the time to get to work.

We want a full list of the best miniature e-boards you can buy right now.

We’ll tell you everything you need to know.

Those things are:

  1. Top Speed
  2. Range
  3. Weight Capacity
  4. Incline Rate
  5. Deck Size
  6. Weight
  7. Motor
  8. Cost

All the information we get will be relevant to 2020 time frame, so don’t be surprised if these boards and models change over time!

Let’s get started!

Ownboard Mini KT

Top Speed: 25 mph

Range: Depends on battery: 14 miles for Samsung 6.0Ah, 19 miles for Sanyo 8.1Ah.

Weight Capacity: 265 lbs

Incline Rate: 30%

Deck Size: 30 inches

Weight: 17.2 lbs

Motor: Dual Hub 250 Watts

Cost: Starts at $449

A few years ago, I bought a Mini KT. I took it to get to the train station, from which I took the train every day to school.

My neighborhood is hilly and bumpy, so it wouldn’t be the best place to ride an electric skateboard.

Wasn’t important…

It was easy for this thing to split up my neighborhood. It has a lot of power, speed, and range. On my street, a 200-foot hill is easy for it to climb.

The fact that this Chinese brand board was such a beast kind of surprised me.

Super underrated.

I really think you should try it. And at $449, it’s a great deal. If you want a longer range than the standard 14 miles, you can pay $549 for the more expensive Sanyo Tesla 8.1Ah battery that will give you a range of 19 miles.

This is why this board is the best!

Boosted Mini X

Top Speed: 20 mph

Range: 14 miles

Weight Capacity: 250 lbs

Incline Rate: 20%

Deck Size: 29.5 inches

Weight: 18 lbs

Motor: 1,000 Watts

Cost: $999

By far, Boosted has been the most popular brand of electric skateboard on the market. Even though their boards are more expensive than average, they still work well.

The Mini X and its brother, the Mini S, were both unveiled on April 14, 2018.

The announcements showed that the two boards were smaller, less expensive, and cheaper versions of the Boosted brand.

The deck of the Mini X is concaved and stiff, but it still gives you great control and agility. Around corners, it’s easy to make sharp and tight turns. When you combine this board with the super responsive and sensitive remote, you have a great product.

Evolve Stoke

Top Speed: 22 mph

Range: 10 miles

Weight Capacity: 220 lbs

Incline Rate: 30%

Deck Size: 33.5 inches

Weight: 17.9 lbs

Motor: Dual 1,500 Watts

Cost: $1,299

This board is almost as small as a mini board…

It’s 33.5 inches long, which is pretty long for an e-board that looks like a skateboard. I never got to test this board in person, which is a shame because I love the Evolve Carbon GTR series.

If this board is even a little bit like the Carbon GTR, it’s a beast for sure.

The boards from Evolve are very expensive, but they don’t let you down.

The two 1,500-watt motors almost seem like too much, but the reviews for this board are all 10/10. Approved!

Meepo Mini 2 ER

Top Speed: 29 mph

Range: 20 miles

Weight Capacity: 300 lbs

Incline Rate: 30%

Deck Size: 30 inches

Weight: 18 lbs

Motor: Dual 540 Watts

Cost: $609

The version of the Meepo Mini 2 that has been improved. This board did better than any other.

If you look at this board’s numbers, there’s nothing bad you can say about it. In fact, this board’s specs beat those of any other board you might compare it to.

And at a reasonable $609, why the hell wouldn’t you buy this board?

You can buy 2 Evolve Stoked boards for this price…

And if you still think this price is too high, you can buy the regular Meep Mini 2 (no ER battery) for $409. The 11-mile range is the only difference.

How good this board is really blows my mind.

The only thing I don’t like about it is that it moves too fast. With a top speed of 29 mph and a short deck, that complaint makes sense. I don’t think you should ride THAT FAST because you could lose control and hurt yourself.

All the other reviews, however, were great.

WowGo Mini

Top Speed: 23 mph

Range: 12 miles (Can be upgraded)

Weight Capacity: 330 lbs

Incline Rate: 30%

Deck Size: 28 inches

Weight: 15.4 lbs

Motor: Dual 250 Watts

Cost: Starts at $379

WowGo is another one of those electric skateboards made in China that are shaking up the market.

The board not only works better than the Boosted Mini X, but it also costs more than half as much.

But don’t just look at the specs; the board is also fun to ride. It turns well, is quick, and doesn’t feel too stiff.

Even though it’s not first on the list, it has to be pretty high.

Don’t forget that $379 is almost nothing for a board with so many great features. This electric skateboard is very portable because it only weighs 15.4 pounds and has a 28-inch deck.

Don’t be afraid to check out their other boards and choices.

Leafboard Plus

Top Speed: 20 mph

Range: 12.4 miles

Weight Capacity: 240 lbs

Incline Rate: 20%

Deck Size: 25 inches

Weight: 10.5 lbs

Motor: 1800 Watts

Cost: $489

The company Leafboard got its start as a Kickstarter project.

Leafboard was one of the first mini electric skateboards, and it helped start the trend toward smaller, cheaper, and more portable boards.

The board got a lot of attention from the media and got a lot of money and people to back it.

How did it turn out?

Leafboard was able to get their business started!

Now you can buy 3 different boards from Leafboard. Each one has a really cool and unique design that makes it stand out from all the other plain-looking e-boards on the market.

It’s also the lightest electric skateboard on this list.

You can even pick the kind of wood that goes into your deck:

  • Birch
  • Bamboo
  • Oak
  • Walnut
  • Elec

If you want, you can also pay an extra $40 to change the standard wheels to Orangatang Kegel 80mm Wheels.

MaxFind Max 2 Pro Dual Motor

Top Speed: 24 mph

Range: 15 miles

Weight Capacity: 220 lbs

Incline Rate: 25%

Deck Size: 31 inches

Weight: 14 lbs

Motor: Dual 600 Watt = 1200 Watts Total

Cost: $619

I’ve been on a few MaxFind boards and can say that they are great e-boards that are well made.

The same goes for the Max 2 Pro.

First of all, the board is finished with a beautiful design. It’s the first electric skateboard in the world that looks like a diamond.

Even though this is a “mini” electric skateboard, it has a good size-to-weight ratio. The deck is 31 inches long and only weighs 14 pounds.

There are two different kinds of the Max 2.

  1. Dual Motor
  2. Single Motor

We chose the Dual Motor for this list because its specs are better than those of the single motor. Even so, the single motor is $90 less expensive and still performs very well.

Acton Blink S2

Top Speed: 18 mph

Range: 14 miles

Weight Capacity: 250 lbs

Incline Rate: 20%

Deck Size: 31.5 inches

Weight: 15 lbs

Motor: 1000 Watts

Cost: $599

Because of the Acton Blink S2, Acton is one of the better-known brands of electric skateboards.

On their website, they sell two other boards, but neither is nearly as popular as the Blink S2.

Even though it can only go as fast as 18 mph, it’s still a lot of fun to ride because it’s so easy to control and rides so smoothly.

And to make you more visible at night, the Blink S2 comes with front headlights, rear taillights, and side lights. It also shines light on what’s in front of you.

The Acton app, which you can get from the App Store or Google Play, is another great thing about the company.

The app can keep track of your board, rides, battery level, and estimated range. It can also compare your ride miles with those of other Acton riders around the world.

If you’re still not sure about how well this board works, think about this…

Reviewers have given the Blink S2 an overall score of 5 out of 5 stars.

Atom B10

Top Speed: 16 mph

Range: 7 miles

Weight Capacity: 275 lbs

Incline Rate: 12%

Deck Size: 29.5 inches

Weight: 11 lbs

Motor: 1000 Watts

Cost: $449

Let’s be honest.

The atom doesn’t work as well as it could. It doesn’t go very far, and its top speed isn’t great either.

With a 12 percent incline, it will be hard to go up even the smallest hills.

Considering that the motor has 1000 watts of power, this is kind of strange.

Even though it says it can hold up to 275 pounds, this board is really for kids and teens.

I think this board would be great for someone who is lighter. But if you are overweight, you should cross this off your list and think about something else.

The design and art on the board and deck, which are made of maple, are pretty nice.

Swagtron Spectra

Top Speed: 16 mph

Range: 12.4 miles

Weight Capacity: No info available*

Incline Rate: 15%

Deck Size: 19.4 inches

Weight: 12.5 lbs

Motor: No info available*

Cost: $799

The Swagtron brand seems like it produces a decent line of products.

  • Hoverboards
  • Electric Scooters
  • Electric Bikes
  • Electric Skateboards

Many of them seem to be of good quality and have modern designs that are really cool.

But I had trouble finding basic information about the e-boards they sell on their website, like the size of the deck, the size and power of the motor, and other useful details.

So, the Swagtron Spectra is the perfect example of a small electric skateboard. It’s the shortest and most compact board because it’s only 19.4 inches long.

No, really, the Spectra would fit and be easy to carry in your backpack.

But what’s the best thing about Swagtron?

They have an app that lets you control your board from your phone, lock it for safety, choose different ways to ride, and do a lot more.

Conclusion

Even though it might be tempting to spend more than $1,000 on an electric skateboard, you should know that smaller e-boards are much cheaper and almost as good as those big, expensive electric longboards.

If you ride to work, you might be better off with a small board.

Many of them are small enough to fit in a backpack, which makes them a great choice for people who take the bus, train, or walk to work or school.

No matter how big or small the board is, riding it is always risky.

From what I’ve seen, riding a smaller board is even riskier because your feet have less space and the base is smaller (making you more tip-able).

Always be careful and slow down if you need to! Speed does kill!

I hope this article was helpful to you and that you’ll think about some of these boards in the future.

Cheers!

 

What fertilizer makes grass dark green

Prepare Your Grass For Domination

You want your lawn to look its best whether you’re having a BBQ, a graduation party, or even a wedding. We lawn care nuts spend a lot of time on our lawns to make them as green, lush, and healthy as possible. Now it’s time to show off all your hard work and make your dark green grass “pop” for your guests.
The date is set, and the responses are in. Let’s make a lawn that will “wow” your guests. Follow these five easy steps to make your grass a deep, dark green that you can show off at a party or holiday event on your lawn.
Note that this process will begin two weeks before your event. Take pictures of your dark green lawn before and after you fixed it so you can be proud of your work.

Step 1: Mowing & lawn stripes

Set your stripes two weeks before your lawn party. If you don’t already have a striping kit, you can buy one on Amazon. But Big League Lawns makes the best of them all. They cost a lot, but they work great.
Think about the pattern and direction you want to go in and stick to it for at least the last three mowings before your big lawn event. The lines between the stripes need to be set and clear.
Also, start lowering the height of your cut (HOC). The grass should be about 4 inches taller when it’s hot, but it should be shorter for your lawn event. Slowly move the mower deck down. For your last cut, you should aim for 3 inches or even a little lower.
Finally, bag your clippings. You don’t want any trash to be visible on the lawn or on people’s shoes. So start bagging while you’re lowering the HOC.

Step 2: Edge your landscape and walkways

If you haven’t already, set your edges two weeks before your lawn party. Depending on how much you need to edge, you might need to start with an electric lawn edger. If the area is small, you can use a saw-tooth edging tool or a square blade.
If you have been trimming the edges, keep using your string trimmer to keep them looking tight, and use your leaf blower to clean up the trimmings.

Step 3: Fertilize your lawn

Ten days before your party on your lawn, put down a nitrogen- and iron-based fertilizer. I wouldn’t use organics, especially Milorganite, because the smell might last. Also, organics tend to have a slower release, so things won’t “pop” as quickly.
Consider using one of the following, but keep in mind that if your lawn party is in the middle of summer, you shouldn’t use these on a lawn that is suffering from drought or disease. But if your lawn is green, healthy, and gets enough water, these will be fine:
Carbon Phix (20-0-12) (21-0-8)
Kelp4less Lawn Mix (21-0-8)
Scott’s Green Max (27-0-2)
Jonathan Green Green Up (29-0-3)
Lesco Turf Fertilizer (24-0-11)
Keep to your normal schedule of giving your plants an inch of water (or more or less, depending on the month or season). If you follow my guide for taking care of your lawn, you will already be spraying Kelp4less Extreme Blend or Green Lawn & Turf. You can also add a second dose here. Humic acid and sea kelp can only help in this situation.

Step 4: Apply Liquid Nitrogen + Iron

Four to seven days before your party, put a liquid iron on the grass (chelated iron). This is the most important thing you need to do to get the dark green lawn we all want. This is your hidden strength!
This product should be sprayed on evenly with a backpack sprayer or some other type of sprayer. Spray later in the evening so that the iron stays on the grass blades all night. The next day, after the iron has had plenty of time to get into the grass blades, you can run your irrigation cycle.
The best choices will come from the new line of lawn care products called Kelp4Less. You’ll give your turf not only Nitrogen and Iron, but also a lot of other minerals and micronutrients that are good for it.
Green Balance (1 oz. per 1,000 sq. ft.) AND Micro Greens (2 oz. per 1,000 sq. ft.)
Heavy Hitter (4 oz. per 1,000 sq. ft.)
Use coupon code lanwphix for 15% off – and free shipping
Ferromec AC (15-0-0) is a good choice for solutions that have already been mixed. Iron Max AC 6-0-0 is a great choice if you want a true chelated iron product and are a purist. You can use up to 8 ounces of Ferromec AC per 1,000 square feet, but I only use 6 ounces per 1,000 square feet, so this large container is a good choice for larger lawns.
If you have a smaller area and only want to use the iron this one time, LawnStar and Southern AG both make fine chelated iron that will cover up to 4,000 square feet.
If your lawn is turning yellow because it doesn’t have enough iron, this is the best way to bring it back to life.

Step 5: The final mow and cleanup

Do your last mow, edge, and clean up the day before your party. The last cut should be 3 inches or less. Put those cuttings in a bag and make sure your stripes are deep and even. And use the weed whacker or string trimmer to walk around your property and make sure the edges are clean and tight.
Lastly, take a picture that has the best angles and lighting. Your lawn should look as good as new. Now, have fun at the party and accept all the compliments you’re sure to get.

How can I get a dark green lawn?

The best and fastest way to get a dark green lawn to show off to your guests and neighbors is to use a fast-release nitrogen fertilizer and a liquid iron product. The fertilizer should be put down a week before the event and then watered in, and the liquid chelated iron should be put down three to five days before the event.

How do I get stripes in my lawn?

Stripes on lawns are just the sun or light being reflected and bent in different ways. As you mow your lawn, the grass blades will naturally fold over in the direction you’re going. When you use a striping kit like a Big League Lawns Checkmate striping kit, the stripes stand out even more. With the sun behind you, the light stripes will look like the grass blades are folding away from you, while the dark stripes will look like the grass blades are folding towards you.

See more : Best lawn mowers for thick grass

Vizio Sound Bar Flashing White Lights: A Complete Guide For You In 2022

The sound bar from Vizio is one of the most popular choices among users. When you use a soundbar to listen to music, you enjoy it much more. Adding more bass action brings the sound up a notch and makes the vocals sound better. One of the best things about soundbars is that they make the sound in a room flow together.

Most people love the Vizio soundbar, which is one of the best on the market. But you might have trouble understanding it. Why do the white lights on my Vizio soundbar flash?

There are many things that could cause this to happen. It’s hard to tell if the problem comes from the hardware or the software. Most people think that technical problems are to blame for these kinds of problems. It might be true sometimes, but there are always a few things you can do to fix it. This article will explain why the lights are flashing white.

Why do Vizio sound bar lights flash White Lights?

There are a few reasons why Vizio’s lights go up and down, but this can happen with any sound bar. Each soundbar is different, and it does different things. The Vizio soundbar, on the other hand, is not affected by software or hardware problems when they happen. Let’s figure out what’s wrong:

1.The soundbar is not properly connected

There are things going on outside of the Vizio sound bar that make the White Lights flash so often. If you have a loose socket where the plug doesn’t fit well, white lights will flash.

This can sometimes mean that the soundbar keeps turning on and off. You can plug the soundbar back in after unplugging it. In these kinds of situations, people could also try to get more power.

In this case, unplug the soundbar and leave the socket open for a few minutes. After a few minutes, you can plug the AC cord into the soundbar and hold down the power button for a few seconds. Most of the time, this trick should solve the problem.

2.Disruption of settings

When something goes wrong with the settings, lights often start to flash.

There is a chance that the user accidentally pressed a button, which could make the light keep flashing.

In the settings, you can change a few things before the flashing starts. Check each setting one at a time instead of changing them all at once to find out why your light is flashing.

We will find out who did it. But if you don’t, you can fix the problem by resetting the whole soundbar.

3.Setting the LED light

If your soundbar has an LED light setting, the manual should have a page that tells you how to use it.

Many soundbars have a flashlight feature, which is great when you want to listen to music at night.

Some people leave the LED lights on in their rooms to make them more relaxing. With LED lights, on the other hand, you can do a lot more, like make them flash. If you read the manual, you might be able to figure out why the light is flashing.

How to stop lights from flashing in a Vizio soundbar?

Many people are annoyed by how fast the White Light lights flash. There are only a few buttons on the soundbar, and each one does something different.

When you press two buttons on a Vizio soundbar at the same time, it might do strange things. If the lights keep flashing white, you need to press the Bluetooth button and the input button at the same time. After the light blinks four times, it will stop.

Conclusion

Vizio sound bars are the best when it comes to sound quality. The music sounds the best, and the beat will blow your mind.

Sometimes, small problems need to be fixed. People don’t understand why the white lights on their Vizio sound bar keep flashing. We have a few ideas about what could be going on here. If you can’t figure out what’s wrong, call the help center or a professional.

 

Categories

August 2022
M T W T F S S
1234567
891011121314
15161718192021
22232425262728
293031